BJM SV750C-115 Non-Clog Solids Handling Electric Submersible Pump

Brand New


this item condition is new

Special Order


usually ships within 10-15 business days
$789.99
Model No: SV750C-115
Website Product ID: 15063

Features

  • The SV-pumps are equipped with Vortex impellers, undoubtedly the best non-clog impellers ever invented for the handling of mud, raw sewage, viscous liquids, rags, wood chips and other solids. They pass solid up to 90% of pump outlet diameter.
  • .
  • Longer Power Cord – Standard 33ft. power cord on pumps ½ HP and below and 50ft. on pumps 1HP and above. Longer Power Cord – Standard 33ft. power cord on pumps ½ HP and below and 50ft. on pumps 1HP and above.
  • .
  • 304SS Motor Housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
  • .
  • Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
  • .
  • More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
  • .
  • Tough Pump Construction – Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.

Specifications

  • GENERAL SPECS: :
  • Maximum Flow : 100 GPM
  • Maximum Head : 31.5"
  • Pump Type : Non Clog Vortex
  • Discharge Size : 3" NPT-M (2" NPT-M optional)
  • CONSTRUCTION/MATERIAL SPECS: :
  • Motor Casing : 304 SS
  • Pump Volute : Cast Iron
  • Lip Seals & O-Rings : Buna-N
  • Rotor Shaft : 304 SS
  • External Hardware : 304 SS
  • Quantity Oil in Seal Chamber : 9.3 US Fl. Oz.
  • ELECTRICAL/MOTOR SPECS: :
  • Motor Rating : 1 HP
  • Motor : 3450 RPM
  • Motor Insulation Class : F
  • Motor Service Factor : 1.1
  • Voltage : 115/230, 1ph-60Hz
  • Current F.L.A. : 14
  • Motor Protection : Thermal & Amp Overload
  • Power Cord; Gage; Length : A.W.G. 14/3, 33', STOW
  • Maximum Liquid Temperature : 104F
  • Seal Minder® : Optional

Includes

  • (1) BJM Non-Clog Solids Handling Electric Submersible Pump (SV750C-115)